As we know the Microsoft’s latest Operating System, Windows 11, comes with new advanced features and attractive design, but it is also inherited with issues and bugs. Such one is KERNEL DATA INPAGE ERROR BSOD error, it’s a serious error, as it causes to lose your data and lead to some complicated issue. So as soon as possible you need to get rid of the same error.

This BSOD error is throwing an indication that there is an issue with your storage drive, so primarily you need to address this issue. The KERNEL DATA INPAGE ERROR stop code sometimes arise with few error such as 0x0000007A, 0xC000009A, 0xC000009C, 0xC000009D, 0xC000016A, and 0xC0000185.

If you’ve experienced any of these error codes, this article is for you. Anyway, in this article, we have gathered some definite solutions to deal with this BSOD error. Let’s have a look.

Fix 1: Check Hardware Connections: 

Sometimes the problem is with your hardware cable connection. If the cable connected to and from the hard drive is connected faulty, you will encounter the KERNEL DATA INPAGE ERROR (BSOD) issue in Windows 11. Here you need to ensure the Hard Drive SATA cable and power supply cable are connected properly. 

Fix 2: Run CHKDSK Scan:

You should perform a check disk scan to avoid the BSOD KERNEL DATA INPAGE ERROR in Windows 11. The CHKDSK scanning tool will always try hard to fix the problem seen on the drives.

To run CHKDSK, you can follow these steps,

  • Firstly, click on the search icon in your Windows 11 taskbar and type cmd in the search box.
  • Then launch the Command Prompt with administrative access.CHKDSK
  • Inside the Command Prompt window, type or copy then paste the following command and then press Enter,

chkdsk /r /f C:

  • Based on your System partition, you can replace the letter C:
  • Once done, wait for the scanning process to complete on its own. Then check the said BSOD issue is resolved or not.

Fix 3: RUN a Deep Antivirus Scan:

Sometimes KERNEL DATA INPAGE ERROR in Windows 11 prevents you from accessing the system due to some malware effect. The best solution here is to run a better antivirus full scan. To do so, 

  • Firstly, type windows security in your Windows 11 taskbar search box and open relevant results.
  • Then select Virus & threat protection and click on the Scan options link under the Quick scan tab.
  • Now in the newly opened window, click on the radio button beside the option Microsoft Defender Offline scan and click on Scan now button.
  • To begin the scanning, you need to restart your system.

Fix 4: Utilize Startup Repair Tool:

Another solution to overcome the KERNEL DATA INPAGE ERROR (BSOD) issue on Windows 11 is utilizing an in-built Startup repair tool. To use the tool, you can follow these steps,

  • Firstly, repeatedly hard power off your Windows 11 to enter into the Recovery Mode.
  • Then select Troublesoot->Advanced options->Startup Repair.
  • Here if your system detects an issue, it will repair automatically.
  • If you received the Startup Repair couldn’t repair your PC message in the Startup Repair window, click on the Advanced options tab. 
  • Now you will reach the main menu; from there, select Troubleshoot-> Advanced options->Startup Settings.
  • Inside the Startup Settings, click on the Restart button to enter into Safe mode.
  • If the issue persists even after the system restarts in Safe mode, then you need to understand the BSOD issue causing by any third-party application, and you need to uninstall it. 
  • For doing so, again go to Recovery mode->Advanced options->Uninstall Updates and roll back all the recent updates.
  • If this doesn’t help, then select System Restore and roll back your system to the previous state where it was working fine.

Fix 5: Update the Driver:

Sometimes the KERNEL DATA INPAGE ERROR (BSOD) will appear on your Windows 11 if the driver installed in your system is outdated. Here the best possible solution is to update the driver or reinstall it freshly. 

  • Firstly, type Device Manager in your Windows 11 taskbar search box and open the relevant search result. 
  • Inside the Device Manager, expand the Disk drives option and right-click over the driver and select its Properties.
  • Then select the Driver tab from the top menu and click on the Update Driver option.
  • In the new prompt, select Search automatically for drivers option.
  • If your system finds any new drivers, it will install them automatically. If not found any new, then you need to click on Search for updated drivers on Windows Update.
  • Now you will reach directly to the Windows Update screen; there, click on Check for updates tab.
  • Let’s wait; your system will now download and install any pending updates.
  • Once done, restart the system and check for improvement.

In case the above trick does not work, then you need to reinstall the drivers using the above same steps. Instead of selecting the Update Drivers option in the driver’s Properties window, select Uninstall Devices option. The reinstall the deleted driver.

Fix 6 : Run SFC Scan:

If any of your system files get corrupted, you might encounter the KERNEL DATA INPAGE ERROR (BSOD) issue in Windows 11. System File Checker will search for any malicious files, and if any files are found, it will automatically repair them.

To do so, 

  • Firstly, type cmd in the taskbar search box and open the Command Prompt window with administrative access.sfc/ scannow
  • Inside Command Prompt, type or copy then paste the following command and then press Enter,

sfc /scannow

  • Now lets the scanning completes on its own; once completed, restart the system and check the said issue is resolved or not.

Fix 7: Edit Paging System:

Last but not least attempt to get rid of the KERNEL DATA INPAGE ERROR (BSOD) issue in Windows 11 is setting the paging system to automatic.

To do so, 

  • Firstly, press Windows + E simultaneously to launch the File Explorer.
  • Then select and right-click on This PC from the left pane menu and click on its Properties.
  • Now inside the new window, click on the Advanced system settings link.
  • In the System Properties window, click on the Settings tab under the Performance section.
  • Select the Advanced tab from the top menu inside the Performance Options window and click on the Change button under the virtual memory section.
  • Then tick the checkbox beside the option Automatically manage paging file size for all drives and click the OK button.
  • Once done, restart the system and check for improvement.

So these are all about the KERNEL DATA INPAGE ERROR (BSOD) issue in Windows 11 and its fixes. If you have any queries or doubts after reading this article, please leave a comment in the below comment box.